Showing posts with label Raid. Show all posts
Showing posts with label Raid. Show all posts

Wednesday, September 16, 2015

HP servers raid config ORCA raid 1 level

In hp servers raid utility ORCA (Option ROM Configuration for Arrays) - press F8 to enter configuration - to createa a RAID 1 mirroring you have to select RAID 1+0

 HP Array Configuration Utility User Guide : pg 64
http://www.hp.com/ctg/Manual/c00709035.pdf 

In a RAID 1+0 configuration, data is duplicated to a second drive
They don't make no differentiation between RAID 1 and RAID 1+0 - it depends on how many HDDs you select.

Tuesday, September 23, 2014

Configure a software raid 1 mirroring in windows 7

You need to use a HDD as big or bigger then the one you want to mirror, one identical would be best.

Open Disk Management either by accessing Computer Management by Right click - on My Computer - and select Manage - then select under Storage - Disk Management
or type in Run - diskmgmt.msc

IF you want to make a mirror to your active windows hdd you MUST start first with the System Reserved partition (100MB NTFS) or convert the whole hdd to dynamic first.
(if you start mirroring from the second, third etc partition you will not be able to mirror the System Reserved partition unless you wipe the hole hdd and reinstall windows)




Right click System Reserved partition and select Mirror volume - select the empty disk press OK and then you will be asked if you want to convert the two HDD to dynamic disks.
Select OK.
Wait for each mirrored partition to sync or it will take many hours to sync them in parallel


This will only work with MBR formated HDD - and for booting/installing Windows you must select in BIOS - boot options Legacy Mode (not UEFI).
If you chose to install windows with GPT partitioning style it will create some system reserved partitions that are not visible in disk management so you will be unable to mirror them.

RAID 0 - stripping for performance
RAID 1 - MIRRORING
RAID 10 - https://www.youtube.com/watch?v=bcCfVYZa0k0

Wednesday, August 6, 2014

SATA mode : AHCI vs IDE vs RAID


AHCI  - is the native sata mode.
- supports hot plugging (add/remove component while the computer is running) and some faster indexing
To be able to take advantage of the sata hot-plug your motherboard or sata controller must also be sata hotplug capable ( not all are ).
If it is, and it is activated from BIOS you will see the Safely Remove Hardware icon on the system tray, and your hard drive will be listed there.

RAID - is AHCI mode plus vendor specific raid configurations

Although windows vista or later has AHCI support will not load the driver at start-up if the os was installed in IDE mode, but can be installed in windows after booting in IDE mode.

AHCI support exists in Windows Vista, 7 and 8.
Windows Xp only supports IDE mode natively at boot but you can add a sata/raid driver via the F6 boot option or after the os is installed.

Monday, July 28, 2014

Raid error when installing windows xp with F6 option

File iaStor.sys cause an unexpected error (4096) at line 2113 in d:\xpsprtm\base\boot\setup\oemdisk.c.


To solve the problem you must extract the archive directly on the floppy drive, not extract to default location and then copy/paste to floppy.
Prior to this I have changed windows cd-s, countless pieces of floppy disks and many hours.

If the motherboard manufacturer does not provide good archive or one that cannot  be extracted directly to floppy you can download from intel downloadcenter by searching the south bridge chipset that you can find on the motherboard manufacturer website.

Intel® ICH9R/ICH9M-E/ICH10R/PCH/PCHM SATA RAID controller  

https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=17882 

---------------------------------------------------------------------

Se extrage arhiva cu drivere RAID direct pe disketa si nu in locatia initiala si apoi sa copiezi fisierele pe disketa. Daca producatorul nu ofera o arhiva ce poate fi extrasa direct pe disketa se cauta dupa modelul chipsetului (south bridge) pe site la intel, nvidia etc dupa caz.